Categories

System malfunctions and false alarms can be exasperating, and even more concerning, might prevent your security system from doing its job effectively. Luckily, most issues, from false alarms to dead batteries, are simple to remedy. Explore our suggestions for troubleshooting your home alarm system in Wausau. We’ll help keep your family members safe and your system running properly.

Test Your Home Security System In Wausau

One great way to troubleshoot your property’s defense is to test it yourself! The latest systems have a test mode so you don’t mistakenly prompt an emergency call. Once in test mode, take these steps:

• Turn on your system as you normally would when leaving.
• Open a door or window that uses a contact sensor, or test other sensors. Close the window or door once you’re done so it doesn’t prompt the alarm when you switch the system back on.
• Allow the alarm to sound for 60 seconds to make sure a signal is dispatched to the security company and an entry is made in the alarm activity log.
• Continue testing devices as you wish
• Check the systems’s activity log to confirm that everything’s working.

No need to worry, monitoring agents will be able to see that your alarm system is being tested. Be sure to turn test mode off when you’re done. It’s smart to test monthly or whenever you adjust your home’s internet or phone connectivity.

Evaluate The Placement And Condition Of Motion Detectors

Although an crucial part of your alarm system, motion sensors are notorious for false alarms. You can help prevent them with a few straightforward troubleshooting steps.

• Do a physical inspection. Are there things that could move within the sensor’s detection zone, like a curtain caught in a breeze?
• Is the sensor dirty? Cobwebs, dirt, and debris can cause issues. Ensure the sensor is clean.
• Does the motion detector come with pet immunity you can enable? Some sensors can be programmed to ignore pets weighing as much as 100 pounds.
• When was the battery replaced? Low batteries might affect performance or cause false alarms.
• Is the sensor aimed toward a heat source? Too much heat from sunlight or a fireplace can trigger an alarm.

Keep Batteries On Hand And Pay Attention To Low Battery Signals

One helpful benefit of modern home security systems is that they’ll alert you when batteries are running low. If your system uses a control panel or app, you’ll typically find messages there. Depending on the alarm, you could hear an occasional beep when batteries are running out. 

Motion sensors, contact sensors, smoke detectors, and other wireless tools have batteries that should be replaced every so often. It’s best to keep batteries ready and establish a replacement schedule. Top systems also come with a rechargeable backup battery for the central control panel. This battery keeps your system running if you lose power and should charge back up once power is restored. If it doesn’t, you will need to replace it.

Troubleshooting Is Effortless With ADT Home Security In Wausau 

As the top name in home security, ADT designs systems that provide unrivaled functionality and convenience. Accessing test mode is simple through the ADT+ app or MyADT.com, and you’ll always be sent updates when a sensor battery is low. Contact Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system perfect for your Wausau home. Call (715) 256-7915 or complete our form today!